Safety and Effect Analysis etc.). It also evaluates the

Safety Chapter

 

Philosophy:

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

Hazop
study are used to identify, evaluate and develop methods to

control
significant hazards associated with Higher Hazard Processes and Lower Hazard

Operations.
These hazards generally represent the potential for fires, explosions

and/or
release of toxic materials. Hazop use an organized, methodical study approach,
seek to

achieve
a multi-disciplined consensus on hazard control and document results for future
use

in
follow-up, emergency planning and training of personnel involved in operating
and

maintaining the process.

Process
Hazard Analysis systematically identifies the potential safety hazards and is a
well

defined program to remove or
lower these hazards

Purpose:

The
purpose of this chapter is to ensure the timeliness, consistency, and adequacy
of

Hazard
and Operability (Hazop) across the site. Hazop are examinations of each new or

existing
facility to assure that hazards of “catastrophic and major” safety or
environmental

consequences are identified
and adequately controlled to an acceptable risk level

The purpose of this chapter is to maintain
the operation safe and secure by implementing standard safety protocol to
handle this facility.

HAZOP
REQUIREMENTS

 

A
HAZOP is a systematic and comprehensive study of the hazardous events that
could occur in

the
process, using a multidiscipline team and a combination of methodologies (What
If /

Checklist,
HAZOP, Failure Mode and Effect Analysis etc.). It also evaluates the ways to
either

eliminate
the hazard or reduce the risk to an acceptable level.

To
ensure that this activity is conducted properly following guidelines have been
developed.

These guidelines also comply
with the requirement of the OSHA

Hazard and Operability Study:

Followings are the process steps which
involve in algal oil separation

·        
Raw material arrangements
(Algae samples)

·        
Raw material testing

·        
Apparatus Setup

·        
Pre-treatment of raw material

·        
Oil extraction

·        
Pro-treatment of oil

·        
Oil testing

 

 

 

                                                                                                                                                                                                                                                 

Material Safety Data Sheet

Blue-Green Algae Powder MSDS

 

 

 

Product Name: Blue-Green Algae Powder

Catalog
Codes: SLB4462

CAS#:
Not available.

RTECS:
Not available.

TSCA: TSCA 8(b) inventory:
No products were found.

CI#:
Not available.

Synonym:

Chemical
Name: Blue-Green Algae Powder

Chemical
Formula: Not available.

Contact Information: Sciencelab.com,
Inc.

14025 Smith Rd.

Houston, Texas
77396

US Sales: 1-800-901-7247

International Sales: 1-281-441-4400

Order Online: ScienceLab.com

CHEMTREC (24HR Emergency Telephone),
call:

1-800-424-9300

International
CHEMTREC, call: 1-703-527-3887

For
non-emergency assistance, call: 1-281-441-4400

 

 

Section
2: Composition and Information on Ingredients

Composition:

 

Name

CAS
#

%
by Weight

Blue-Green Algae Powder

 

100

Toxicological
Data on Ingredients: Not applicable.

 

Section 5: Fire and Explosion Data

Flammability of the Product: May be
combustible at high temperature.

Auto-Ignition
Temperature: Not available.

Flash
Points: Not available.

Flammable
Limits: Not available.

Products of
Combustion: Not available.

Fire Hazards in Presence of
Various Substances:

Slightly
flammable to flammable in presence of open flames and sparks, of heat.
Non-flammable in presence of shocks.

Explosion Hazards in Presence of
Various Substances:

Risks of explosion of the product in presence of mechanical impact:
Not available. Risks of explosion of the product in presence of static
discharge: Not available.

Fire Fighting Media and
Instructions:

SMALL FIRE: Use
DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water
jet.

Special
Remarks on Fire Hazards: Not available.

Special Remarks on Explosion Hazards: Organic
dusts can form explosive mixtures in air.

 

 

 

 

 Material Safety Data Sheet

                                                          Identity (Trade Name As Used On Label)

 

Manufacturer
ES Industries

MSDS
Number*
110-54-3

Street
Address
701 S Route 73

CAS
Number*
110-54-3

City                       State     
Zip Code
West Berlin, NJ 08091

Date
Prepared
09/01/05

Phone
Number
1-800-356-6140     (856) 753-8400  

Prepared
By*
Matthew Przybyciel

Fax
Number
(856) 753-8484

 

 

Section
1 – Material Identification and Information

 

Components – Chemical Name &
Common Names
(Hazardous Components 1% or
greater; Carcinogens 0.1% or greater)

OSHA
PEL

ACGIH
TLV

OTHER LIMITS RECOMMENDED

Aliphatic Hydrocarbons, C6H14,
Hexane Hexyl Hydride   

 
500ppm

 
500ppm

 
None

 
Non-Hazardous
to ship

 

 

 

 

Section
2 – Physical / Chemical Characteristics

 

Boiling 
 Point                                              

65ºC

Specific
Gravity
(H2O
= 1)

@20ºC
: 0.66

Vapor
Pressure
(mm
Hg and Temperature)

125
@ 20ºC

Melting

Point

Not
Available

Vapor
Density
(Air
= 1)

3

Evaporation

Rate

Not
Available

Solubility
in
Water

Insoluble

Water

Reactive

No

Appearance

and
Odor

Clear, colorless liquid with gasoline
like odor

 

Section
3 – Fire and Explosion Hazard Data

 

Flash
Point and
Method
Used

-7ºF (tee)

Auto-Ignition
Temperature

225ºC

Flammability
Limits in
Air
%  by Volume

LEL
1.2%

UEL
7.5%

 

Extinguisher
Media

CO2 Dry chemical or foam 

Special
Fire
Fighting
Procedures

Self-contained breathing apparatus may be
required

Unusual
Fire and
 Explosion Hazards

Confined material can explode upon
heating

 

Section
4 – Reactivity Hazard Data

 

STABILITY
X  Stable
?
Unstable

Conditions

To
Avoid

 
Vapor contact with spark, flame, a hot
surface 

Incompatibility
(Materials
to Avoid)

 
Strong oxidizing agents

Hazardous
Decomposition
Products

 
Carbon monoxide

Hazardous
Polymerization
?
May Occur
X
Will Not Occur

Conditions
To
Avoid

 
N/A

 

 

 

Section
5 – Health Hazard Data

 

PRIMARY
ROUTES     X  Inhalation              X  Ingestion
OF
ENTRY                    X  Skin Absorption    ? 
Not Hazardous

CARCINOGEN        ? 
NTP                             
? OSHA
LISTED
IN               ?  IARC Monograph        X 
Not Listed

HEATH
HAZARDS

Acute

If inhaled may be irritating to mucous
membrane and upper respiratory

 

Chronic

Possible dermatitis from skin contact

Signs
and Symptoms
of
Exposure

Can produce peripheral polyreurotherapy,
eye irritation, nasal & respiratory passages, dizziness, nausea,
unconsciousness, & dermatitis  

Medical
Conditions
Generally
Aggravated by Exposure

 

Emergency
First Aid Procedures

Seek medical assistance for further
treatment, observation and support

Eye
Contact

Flush with large amounts of water, get
medical attention

Skin
Contact

Wash with soap and water

Inhalation

Remove to fresh air; give oxygen and
artificial respiration if necessary

Ingestion

Do not induce vomiting, have victim drink
8 to 10oz of water to dilute

x

Hi!
I'm Neil!

Would you like to get a custom essay? How about receiving a customized one?

Check it out