LED made clear when it becomes easier for you

LED Technology, we hear more and more about it
every day, we want to update our existing lighting technology to LED but how do
we know what we need to look for?

Whether you are new to
the lighting retrofit business or a seasoned expert, picking the right LED
fixture, lamp or kit for your space can be challenging. There are so many
choices, some good, some bad and some ugly. How do you choose?   The following blog will attempt to discuss
current and projected benchmarks for the efficacy of LED packages and complete
luminaires, as well as providing comparisons to conventional technologies.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!

order now


What Are Lumens in LED Lights?

Just as Watts measure the amount
of energy in a light, Lumens measure how bright it shines. The term “lumen”
actually means “light,” so that’s an easy way to remember exactly what it is.
It’s also important to realize that Lumens in LED lights are the way to choose LED
lights, not Watts. This way of measurement is much more reliable than Watts.


Why Lumens?

In 2011, the US Federal Trade
Commission made it a requirement to measure LED lights by Lumens because they
deemed it more important to dictate how bright the bulb was, rather than power
output. Overall, the importance of Lumens in LED lights is made clear when it
becomes easier for you to determine minimum requirements for outdoor lighting,


How to Find the Lumen Output of Your
Existing or New Lighting

The only way to make sure that you will get
the correct amount of light for the area that you intend to light is through a
lighting layout. A lighting layout will define the lumen output of your old
fixtures and help to analyze new possibilities that give you the maximum amount
of light while also saving money on your electric bill. XTRALIGHT provides our
clients with a FREE lighting layout and design.

With LED Lighting there is a lot to take into
consideration. One of the biggest arguments is light Wattage versus the Lumens
and determining brightness. The old way of looking at how bright a light will
be is to look at the wattage, and with incandescent lamps, the higher the
wattage the lamp is, the brighter it is. Now we need to focus on the Lumens of
the lamp to determine the brightness of the lamp, especially when it comes to

are all familiar with incandescent lamps that are measured in watts, such as
40w, 60w, 75w, with LED lighting you may assume the higher the wattage the
brighter the lamp, this is not what you should think about as you choose LED
replacements. Watts and Lumens are measured in different ways and are very
different. A watt is a unit of electrical energy –
input. A lumen is a measure of light intensity – output. A light bulb uses
watts to make lumens. As there are so many different types of LED chips each
with different lumen outputs, you cannot now assume that for example all 4w LED
lights offer the same lumen output. Different types of LED Chips are as
follows; High Power LED Chip, Dip LED, Lamp LED, SMD, Flux LED, COB LED.

With LED Lighting being more
directional, the lumen output to achieve the same brightness will be lower for
LEDs than traditional lighting because a large percentage of the lumen output
is wasted with older technologies.

The energy efficiency of LED products
is typically characterized using efficacy – which is the ratio of power input
to light output – or technically lumens divided by watts. Sounds pretty simple
right? Well, there are some important nuances we need to be aware of. LED
products are made up of packages: All have their own efficacy.


LED Luminaire

LED Driver

Thermal and
Optical Losses

Baseline – package level efficacy have
many variables, that may not be noticable to specifiers and consumers:

Drive Current

Generating White

Color Quality

Do I get all the information I need
from the Specification Sheet?

The specification sheet will show in
most cases the watts and lumens usually of the fixture package. But what about
how the light is distributed – what happens if it’s a flood, spot or any other
optic pattern. For example, LED lighting is far more focused than traditional
HID lighting which is why I can take a traditional 400wMH (458w) and replace it
with a new light fixture with far less wattage, lumen depreciation and better
efficacy. 400W HID has a wattage of 458W lumens of 20,130 and luminaire
efficacy of 44 LPW . With LED Fixtures the designer can choose where the lumens
go by choosing the right optics and directing them only where needed,
eliminating wasted lumens.

For example Xtralight Viento
insert photo etc/show optic patterns and lumens throw of light how that is
important say in a parking lot where areas are not all the same

Lamp and Luminaire Efficacy

Thermal effects, driver losses, and
optical inefficiencies all combine to reduce the efficacy of LED luminaires
compared to the included LED packages. Considered collectively, these loss
mechanisms can result in a decrease in efficacy of greater than 30%. Notably, the
efficacy of complete LED lamps and luminaires is most relevant to building
energy use.

Thermal Effects

A major factor in determining the
lumen output of an LED is junction temperature. As temperature increases, the
light-generation process becomes less efficient and fewer lumens are emitted.
For this reason, LED luminaires generally require a thermal management system.
However, even in a well designed product, the junction temperature may rise
significantly above laboratory conditions, which could result in up to a 15%
decrease in efficacy. Always understand the conditions of the space in choosing
the right LED luminaire.

Driver Losses

Fluorescent and HID light sources
cannot function without a ballast, which provides a starting voltage and limits
electrical current to the lamp. Similarly, LED’s require a driver, which is
comprised of both a power source and electronic control circuitry. Most drivers
convert line voltage to low voltage and current from AC to DC, and may include
supplementary electronics for dimming and/or color correction. In choosing the
correct driver for the system the LED manufacturer considers many variables,
dimming, lumen output, voltage all important features essential to optimizing
the lighting system performance.

Optical Losses

Regardless of source type, the use of
lenses, reflectors or other optical systems to shape a product’s distribution
ultimately reduces the total amount of emitted light. For LED’s, this is
another contributing factor in the difference between package efficacy and lamp
luminaire efficacy. However, the magnitude of the effect is difficult to state
given the large diversity of fixtures in the marketplace.

Terms Commonly Used When Referring to

LPW – Lumens per Watt. The number of lumens produced by a light
source for each watt of electrical power supplied to the light source.

LUMEN DEPRECIATION – The decrease in lumen output of a
light source over time; every lamp type has a unique lumen depreciation curve
(sometimes called a lumen maintenance curve) depicting the pattern of
decreasing light output.

For instance, a 400 watt metal halide
depreciates nearly 70% in the first 3 years vs a comparable LED High bay
fixture which depreciates 30% over 50,000 hours, one of the distinct advantages
of LED lighting.

LUMEN MAINTENANCE – The deterioration in the amount of
light that is emitted from a lamp over time. A lamp with a good lumen
maintenance will emit a consistent amount of light over its lifetime, emitting
as much as 90% of its original capability at the end of its lifespan.

LUMINAIRE – A complete lighting unit which
contains a lamp/LED board, housing, driver/ ballast, sockets and any other
necessary components.

LUMINAIRE EFFICIENCY – The ratio of lumens emitted by a
luminaire to the total lumens emitted from the light source within the

LUX – A unit of illuminance equal to 1
lumen per square meter.

MEAN LUMENS – The average lumen output of a lamp
over its rated life. Mean lumen values for fluorescent and HID lamps are
typically measured at 40% of their rated lives.

INITIAL LUMENS – The lumens produced by a lamp after
an initial burn in period (usually 100 hours).

How LED Lighting differs from other
energy-efficient lighting technologies?

LED’s offer the
potential for cutting general lighting energy use nearly in half by 2030,
saving energy dollars and carbon emissions in the process. LED’s have many
unique characteristics – including compact size, long life and ease of maintenance,
resistance to breakage and vibration, good performance in cold temperatures,
lack of infrared or ultraviolet emissions, and instant-on performance, these
are all beneficial in many lighting applications. Additionally, LED’s have the
ability to be dimmed and to provide color control.

Do LEDs Provide High Quality Light?

Key aspects of high-quality light are
the color appearance of the light itself, which is described by its correlated
color temperature (CCT), and how the light affects the color appearance of
objects, which is commonly called color rendition. Color rendition can be
quantified using the color rendering index (CRI), or with one of several other
recently developed metrics. LED light sources have demonstrated that they can
achieve a wide range of color quality, depending on the demands of the lighting
application. However, in order to achieve high levels of color quality, there
are typically cost and efficiency tradeoffs. In general, a minimum CRI of 80 is
recommended for interior lighting, and LED products can readily achieve this
performance. CRIs of 90 or higher indicate excellent color fidelity; LEDs can
also meet this threshold. CRI is far from a perfect metric and is especially
poor at predicting the fidelity of saturated reds, for which the supplemental
value R9 is often used. New metrics, such as the fidelity index (Rf) and the
gamut index (Rg¬), which are described in IES TM-30-15, can provide a more
comprehensive evaluation of color rendering. Learn more about TM-30-15 and LED
color characteristics.

How Long Do LEDs Last?

LED luminaire useful life is often
described by the number of operating hours until the LED luminaire is emitting
70 percent of its initial light output. Good-quality white LED lighting
products are expected to have a useful life of 30,000 to 50,000 hours or even
longer. A typical incandescent lamp lasts about 1,000 hours; a comparable CFL,
8,000 to 10,000 hours; and the best linear fluorescent lamps, more than 30,000
hours. Learn more about LED lifetime and reliability.

A primary cause of lumen depreciation
is heat generated at the LED junction. Unlike other light sources, LEDs don’t
emit heat as infrared radiation, so it must be removed by conduction or
convection. Thermal management is arguably the most important aspect of
successful LED system design.

Are LEDs Cost-Effective?

Costs of LED lighting products vary
widely. Good-quality LED products may carry a significant cost premium compared
to standard lighting technologies. However, costs are declining rapidly. LED
package prices declined to approximately $1/klm by 2016, resulting in
dramatically reduced LED lamp and luminaire prices. In general, LED lighting
products are still more expensive than their conventional counterparts, but
when the costs of energy and maintenance are included in the total cost of
ownership, LED-based products can have a distinct advantage.


The efficacy of LED products has
steadily improved since their introduction as a source for general
illumination. This trend is expected to continue, thanks to new materials,
better manufacturing processes, and new configurations.

Currently, the efficacy of LED
packages compares favorably to conventional light sources. Many integrated LED
lamps and luminaires have efficacies that are comparable to their traditional
counterparts, but the viability in LED products is greater than the mature
technologies and the LED products are changing rapidly.

Importantly, you must look at other
characteristics when choosing LED technology such as color quality, luminous
intensity and distribution and dimmability. Although high efficacy is an
important attribute for energy savings, it is imperceivable to the users of the
space. By just choosing a fixture based on wattage and lumens alone and not
considering where the lumens are being used and/or lost, the project may not
produce the financial success you strived for.

LED technology is rapidly changing.
When considering an LED upgrade, remember ratio of watts and lumens very
important but where are the lumens going, are they wasted. Partner with a
trusted manufacture who can perform photmetrics and designs with the right fixtures
and right optical patterns, allowing for lowest wattage and the correct lumen
package for your space.


I'm Neil!

Would you like to get a custom essay? How about receiving a customized one?

Check it out